1 Intro​

Power Debugger integration Universal local USB, local direct connection, LAN, public network real-time source level debugging, real-time Trace, serial agent one of the multi-function (ARM) debugger tools, super small size and weight, highly integrated functions, Users can use it as a high-speed debugger, voltage isolation debugger, remote real-time source debugging (technical support) and other application scenarios, as well as debugging assistance Trace function, and add other features, such as UART in full scene mode (local USB, local WIFI direct connection, cross-regional public network). And provide full platform support for small and efficient debugger equipment.

2 Product parameter​

2.1 TX​

• Size：55mm x 18mm x 9mm (≈)
• Voltage：5V (USB TypeA)
• Consumption：110mA@5V(min) / 140mA@5V(max)
• Capacity：5.0V@750mA (Max)

2.2 RX​

• Size：56mm x 39mm x 9mm (≈)
• Voltage：5V (USB TypeC) / 5V PIN INPUT
• Consumption：130mA@5V(min) / 160mA@5V(max)
• Capacity：5.0V@1000mA (Max)

TIPS

Product parameters are theoretical data, due to batch, working environment, product improvement and other reasons, actual differences may exist, for reference only, subject to change without notice!

3 Interface​

• ①：Transmitter USB port

• ②：Transmitter status indicator

  • Power light (red)
    • On: The system power supply is normal
    • 1 On 2 Off: The input power supply is faulty (the voltage and load do not match).
    • 2 On 1 Off: The output power supply is faulty (short circuit, excessive load).
  • Status light
    • On: The transmitter and receiver are successfully paired
    • Off: The sending end and the receiving end are not paired
    • Blinking: Communication is in progress (≈1.67hz)
    • 1 On 2 Off: Bluetooth connected
    • 2 On 1 Off: The public network mode is not authorized

• ③：Receiver status indicator (Define same as transmitter)

• ④：Receiver JTAG interface (Compatibility mode)

  • VREF：IO reference voltage, which can be configured by software to 1.8V, 3.3V, 5V IO reference voltage.
  • TRST：JTAG reset
  • TDI：JTAG TDI
  • TMS：JTAG TMS
  • TCK：JTAG TCK
  • TDO：JTAG TDO
  • NRST：Target chip reset pin
  • 5V：Independent 5V power output (Max 400ma, self-protection) / INPUT Supported
  • GND：Ground

• ⑤：Receiver SWD interface

  • VREF：IO reference voltage, which can be configured by software to 1.8V, 3.3V, 5V IO reference voltage.
  • DIO（SWDIO）：Serial debug data line
  • CLK（SWCLK）：Serial debug clock line
  • GND：Ground

• ⑥：Receiving USB Type C port

• ⑦：Receiving UART interface：

  • VREF：IO reference voltage, which can be configured by software to 1.8V, 3.3V, 5V IO reference voltage。
  • RX：Debugger UART receive pin (corresponding to TX of the target chip)
  • TX：Debugger UART send pin (corresponding to RX of target chip)
  • GND：Ground

4 Function list​

•  Multi-mode high-speed Arm cortex-M debugger
  •  Supports local debugging of a single device at the receiving end, and the maximum speed is close to 3M bps.
  •  Supports local networking debugging at the transmitter and receiver (WIFI direct connection).
  •  Support transmitting and receiving LAN Intranet debugging (Local LAN).
  •  Supports remote public network debugging (WLAN) on the transmitter and receiver.
•  Multi-mode serial port transceiver
  •  Local serial port forwarding on the receiving end.
  •  Transmitter + receiver remote local network serial port forwarding (WIFI direct connection).
  •  Transmitter + Receiver Local LAN Serial Port Forwarding (Local LAN)
  •  Transmitter + receiver remote serial port forwarding (WLAN).
•  Support SWD/JTAG
•  WinUSB /HID dual mode support
•  1.8V / 3.3V / 5V IO voltage support
•  Support for on-board external power input (easy integration)
•  RTT Viewer Support (Full features)
•  RTT Scope support (Support for RTT channels and variable monitoring)
•  Bluetooth support (WeChat Mini-app)
•  Cross-platform support (Windows /Linux/MacOS，Wait for upgrade)
•  web support (TBD)

   Refer to the release documentation for more details ：Power Debugger Doc's